---
title: "Post & Core"
slug: "post-and-core-available-for-t710-license-required-for-t500t300"
tags: ["Labs"]
updated: 2025-03-18T08:35:29Z
published: 2025-03-18T08:35:29Z
canonical: "medit.document360.io/post-and-core-available-for-t710-license-required-for-t500t300"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://medit.document360.io/llms.txt
> Use this file to discover all available pages before exploring further.

# Post & Core

Here is an example of a post and core case.

ℹ️Note

- The "Post & Core" option is available for T710, and a license is required for T500/T300.
- The "Post & Core" option is only available when the form information contains the "Inlay/Onlay," "Veneer," and "Telescopic Crown."

1. Select the "Post & Core" option from the Scan Strategy and click "Next."![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680853910050.png)
2. Select the teeth for the Post & Core scan and click "Confirm." Please note that the teeth you select must have corresponding impressions.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680854068140.png)
3. Scan the model.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680854127534.png)
4. Scan the prepared teeth. If you have no trimmed die, scan the model again and trim it to remove the unnecessary parts.  
![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680855489884.png)
5. Scan the corresponding impression.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680855560809.png)
6. Once you move on to the Post stage, you will be asked to assign data for the teeth.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680855607485.png)
7. After assigning the data, click "Confirm" to align the prepared teeth to the model.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680855863411.png)
8. Align the model with the impression by clicking up to 3 alignment points on each data.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680855936979.png)
9. The data will be aligned as follows.![](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/image-1680856112736.png)