--- title: "Model Settings" slug: "model-settings" updated: 2026-02-05T02:27:56Z published: 2026-02-05T02:27:56Z canonical: "medit.document360.io/model-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://medit.document360.io/llms.txt > Use this file to discover all available pages before exploring further. # 모델 설정 이 단계에서는 상악과 하악의 정중선 포인트를 정의하여 악궁의 방향을 조정해야 합니다. ⚠️주의시뮬레이션을 생성한 후 이 단계로 돌아와서 변경을 하면 작업 진행 상황이 초기화됩니다. ![model_settings_1](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/model_settings_1.png) 1. 녹색 점을 드래그하여 양쪽 악궁의 정중선을 설정하고 두 개의 중절치 사이에 배치합니다. ![model_settings_2](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/model_settings_2.png) 2. 다음 단계로 진행하기 전에 초과되는 잇몸 데이터(점막 접합부를 지나가는 모든 데이터)가 있는지 스캔 결과물을 확인합니다. 이렇게 하면 다음 단계에서 프로그램이 더 원활하게 작동합니다. 불필요한 치은 데이터가 있는 경우 오른쪽에 있는 '다각형 삭제' 도구를 사용하여 제거할 수 있습니다. 클릭하고 드래그(또는 여러 지점을 클릭)하여 영역을 선택한 다음 우클릭하여 삭제합니다. 도구 아이콘을 다시 클릭하여 도구를 종료합니다. ![model_settings_3](https://cdn.document360.io/864a4113-cec5-456f-8e97-9b1efd1ed98f/Images/Documentation/model_settings_3.png) 3. 작업이 완료되었다면 화면 오른쪽 하단의 '확인'을 클릭합니다.